FSI two-way interaction using CFX
 

Hello everyone,

I am new to CFX. Can anybody please guide me to some kind of a tutorial to perform a two-way FSI simulation. Thank you for your help.

Re: FSI two-way interaction using CFX
 

Hi You can find a tutorial on FSI in tutorial handbook in CFX manuals. Bye

Re: FSI two-way interaction using CFX
 

Hi, Refer to tutorial no 20 in CFX manuals. Bye Ram Dayal

Re: FSI two-way interaction using CFX
 

Tutorial 20 is not a two way FSI at all. If you use CFX10 then the FSI Tutorial on the CFX Community Page -> Ansys CFX -> Online Courses, released 25. Oct. 05 should help you. Are you aware that you use a MFX license for that? If you do the same with CFX11 a CFX and Mechanical license is all you need.

Good luck.

Re: FSI two-way interaction using CFX
 

There is an example of two way FSI on the www.ansys.com CFX community site.

James

thanks guys
 

as of now i dont have access to the CFX community. I will apply for the membership and then see the forum. thanks again.

Re: FSI two-way interaction using CFX
 

Tutorial 21 in CFX11.0 is complete two-way FSI (Oscillating Plate).