FSI two-way interaction using CFX

August 3, 2006, 22:44

Hello everyone,

I am new to CFX. Can anybody please guide me to some kind of a tutorial to perform a two-way FSI simulation. Thank you for your help.

August 4, 2006, 00:53

Hi You can find a tutorial on FSI in tutorial handbook in CFX manuals. Bye

August 4, 2006, 05:08

Hi, Refer to tutorial no 20 in CFX manuals. Bye Ram Dayal

August 4, 2006, 06:41

Tutorial 20 is not a two way FSI at all. If you use CFX10 then the FSI Tutorial on the CFX Community Page -> Ansys CFX -> Online Courses, released 25. Oct. 05 should help you. Are you aware that you use a MFX license for that? If you do the same with CFX11 a CFX and Mechanical license is all you need.

Good luck.

August 4, 2006, 07:31

There is an example of two way FSI on the www.ansys.com CFX community site.

James

August 4, 2006, 10:42

as of now i dont have access to the CFX community. I will apply for the membership and then see the forum. thanks again.

August 9, 2006, 03:20

Tutorial 21 in CFX11.0 is complete two-way FSI (Oscillating Plate).

August 3, 2006, 22:44	FSI two-way interaction using CFX	#1
Abyss Guest Posts: n/a	Hello everyone, I am new to CFX. Can anybody please guide me to some kind of a tutorial to perform a two-way FSI simulation. Thank you for your help.

August 4, 2006, 00:53	Re: FSI two-way interaction using CFX	#2
Ram Dayal Guest Posts: n/a	Hi You can find a tutorial on FSI in tutorial handbook in CFX manuals. Bye

August 4, 2006, 05:08	Re: FSI two-way interaction using CFX	#3
Ram Dayal Guest Posts: n/a	Hi, Refer to tutorial no 20 in CFX manuals. Bye Ram Dayal

August 4, 2006, 06:41	Re: FSI two-way interaction using CFX	#4
Patrick Guest Posts: n/a	Tutorial 20 is not a two way FSI at all. If you use CFX10 then the FSI Tutorial on the CFX Community Page -> Ansys CFX -> Online Courses, released 25. Oct. 05 should help you. Are you aware that you use a MFX license for that? If you do the same with CFX11 a CFX and Mechanical license is all you need. Good luck.

August 4, 2006, 07:31	Re: FSI two-way interaction using CFX	#5
James Date Guest Posts: n/a	There is an example of two way FSI on the www.ansys.com CFX community site. James

August 4, 2006, 10:42	thanks guys	#6
abyss Guest Posts: n/a	as of now i dont have access to the CFX community. I will apply for the membership and then see the forum. thanks again.

August 9, 2006, 03:20	Re: FSI two-way interaction using CFX	#7
Patrick Guest Posts: n/a	Tutorial 21 in CFX11.0 is complete two-way FSI (Oscillating Plate).

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Transient analysis of particle flow with Fluid-Structure Interaction (FSI)	Julian K.	STAR-CCM+	2	October 11, 2011 10:19
Pros and Cons for CFX, CFdesign, COMSOL	Val	Main CFD Forum	3	June 10, 2011 02:20
Fluid-Structure interaction problem in CFX	Teerapat	CFX	1	January 15, 2008 16:47
FSI using cfx and ansys vs ls dyna or dytran	HAYATE	CFX	1	September 21, 2007 15:11
MFX - for FSI between Ansys Multiphysics and CFX?	Zerocles	CFX	1	June 5, 2006 08:23