CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

Change a boundary condition with routines

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 14, 2006, 06:48
Default Change a boundary condition with routines
  #1
yolan
Guest
 
Posts: n/a
Hi all! I'd like to know if it is possible to make a region which is a wall become an opening using a routine. For example, if a sensor detects a dangerous situation, open the windows. Can anybody help me? Thank you very much!!!
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Use DEFINE_ADJUST change boundary condition liurengtong123 Fluent UDF and Scheme Programming 24 August 1, 2014 10:28
inlet velocity boundary condition murali CFX 5 August 3, 2012 08:56
Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 2 July 15, 2005 04:15
Pressure Boundary Condition Matt Umbel Main CFD Forum 0 January 11, 2002 11:06
UDF, using DEFINE_ADJUST to change a boundary condition Jonas Larsson FLUENT 4 March 21, 2000 19:51


All times are GMT -4. The time now is 07:02.