CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   ICEM How to display surface elem. orientation (http://www.cfd-online.com/Forums/cfx/23038-icem-how-display-surface-elem-orientation.html)

Luk September 8, 2006 03:01

ICEM How to display surface elem. orientation
 
Hallo all, I have simple and very unconvinietn problem with meshing a surfaces in ICEM CFD - I dont know how to display element coordination system for every surface element in model. Can anyone help?

Luk

myron September 8, 2006 07:35

Re: ICEM How to display surface elem. orientation
 
You can display surface element normal by right-clicking on Shells from the Mesh branch and selecting Face Normals.

Luk September 8, 2006 09:37

Re: ICEM How to display surface elem. orientation
 
Hallo, Yes but there are only normal vectors. I meant what to do to have full coordinate system like in Ansys PlotControl->Symbol->Esys (Element Coordinate System).

Luk


All times are GMT -4. The time now is 01:34.