CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   3D,analysis of NACA-0012,with WINGLET & non. (http://www.cfd-online.com/Forums/cfx/23070-3d-analysis-naca-0012-winglet-non.html)

SAEED MAHLOO September 17, 2006 03:17

3D,analysis of NACA-0012,with WINGLET & non.
 
I need an analysys of NACA 0012 Airfoil(chord=1 unit & SPAN =8 x chord) one time without any winglet.other time with very thin winglet(NACA 0012) installed at 90,115,125,135,145 degree ANGLE to outbord(for example the shape is for 135 deg = _____________/ & for 90 deg = _____________| ). (span of winglet is 0.5 chord of wing).upstrem velocity is 200 m/s. the output needed Cl-Cd at angle of attack between 0 to 10 degree & contour of velocity & pressure change in 3D & 2D. I need to ploting result.... PLEASE HELP ME,I have only 2 days time. PLEASE,PLEASE WITH BEST REGARDS THANK YOU

17 sep 2006

--------------------------------------------------------------------------------


Joe September 17, 2006 08:16

Re: 3D,analysis of NACA-0012,with WINGLET & non.
 
Cross posting idiots like you drive away those otherwise prepared to help.

SAEED MAHLOO September 17, 2006 14:58

Re: 3D,analysis of NACA-0012,with WINGLET & non.
 
No i have not any time I need a solved problem.!!! if you can help me please help,...... I have not any software for solving this problem. I don't how work with this software? PLEASE help me? THANK YOU

Use an expert September 18, 2006 06:00

Re: 3D,analysis of NACA-0012,with WINGLET & non.
 
Get some one else who know's what they are doing to do the work!

SAEED MAHLOO September 18, 2006 17:02

Re: 3D,analysis of NACA-0012,with WINGLET & non.
 
I did not know any expert,please say what I do?


Jarmo Monttinen September 22, 2006 14:13

Re: 3D,analysis of NACA-0012,with WINGLET & non.
 
What you are asking for cannot be done in less than 3 - 4 weeks or so, anything less than that will be done with a single mesh that does not lead to reliable results.

If you are willing to pay an expert for 3-4 weeks of work, I'm sure you can find the help you need.

Jarmo


All times are GMT -4. The time now is 00:49.