CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   intermediate results during a transient run (http://www.cfd-online.com/Forums/cfx/23097-intermediate-results-during-transient-run.html)

Michael Skoblin September 25, 2006 13:19

intermediate results during a transient run
 
Hello all. I have suddenly run into a problem of saving intermediate data. I set "Selected Variables" and "Time interval" and formed the list of output. But the first attempt to save intermediate data ends with error of insufficient memory (in the MAKDAT subroutine). The solver "advises" me to increase the size of integer memory stack. Question: how do I do that? I failed to find this possibility in the interface. The funny thing is that I used to save intermediate results many times without any problems, but once I faced this trouble. I made a step backward (used the previous simulation file, which was free of this problem), but the trouble persisted. Thanks, Michael

opaque September 25, 2006 14:00

Re: intermediate results during a transient run
 
Dear Michael,

The memory settings for the ANSYS CFX solver can modified in the Solver Manager under Define Run/Solver tab.

If you cannot find the tab, be certain that the Show Advanced Controls is toggled under Define Run/Run Definition.

Also, you can find the command line flags by

cfx5solve -help

Good luck, Opaque


All times are GMT -4. The time now is 10:04.