turbomachine

March 13, 2009, 09:41

I have very little experience in CFX but I need to make a dynamic analysis of wind turbines and the need to know to take the turbo-machine mudulo someone can help me do it.

mic · March 18, 2009, 05:46

First of all the mesh: Do you already have it?
Or do you have to prepare it? what are you using? CFX-mesh or Icem or Turbogrid?
I don't know what kind of simulation you have to perform on the wind-turbine, but probably you need a domain that contains the turbine (to simulate air around the turbine).
If you have the mesh, than you can import it in CFX-pre and with the turbo-mode you are followed step by step to define your simulation.
Let us know with more details at which step you are in the process...

sivarama1 · March 19, 2009, 00:13

yes,what ever MIC is telling correct send details will clarify it

March 13, 2009, 09:41	turbomachine	#1
LJF Guest Posts: n/a	I have very little experience in CFX but I need to make a dynamic analysis of wind turbines and the need to know to take the turbo-machine mudulo someone can help me do it.

March 19, 2009, 00:13	wind turbine simulation	#3
sivarama1 Member sivaramakrishnaiah Join Date: Mar 2009 Location: india,pondicherry Posts: 76 Rep Power: 17	yes,what ever MIC is telling correct send details will clarify it __________________ sivaramakrihnaiah

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
mass flow rate not conserved in turbomachine, interface defined wrong?	wildli	FLUENT	3	September 15, 2022 12:19
Determining torque and forces on a turbomachine	psd	Main CFD Forum	0	November 10, 2009 06:36
alculating incidence and deviation in turbomachine	sven	CFX	7	September 29, 2009 07:39
ICEM PERIODIC TURBOMACHINE	august	CFX	2	February 20, 2007 22:22
Test Cases for Turbomachine Code Validation	Apurva Shukla	Main CFD Forum	7	August 12, 1999 13:10

March 18, 2009, 05:46		#2
mic New Member Join Date: Mar 2009 Location: Milan, Italy Posts: 12 Rep Power: 17	First of all the mesh: Do you already have it? Or do you have to prepare it? what are you using? CFX-mesh or Icem or Turbogrid? I don't know what kind of simulation you have to perform on the wind-turbine, but probably you need a domain that contains the turbine (to simulate air around the turbine). If you have the mesh, than you can import it in CFX-pre and with the turbo-mode you are followed step by step to define your simulation. Let us know with more details at which step you are in the process...