CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

how i can chart this along line towards two dire?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 8, 2006, 02:33
Default how i can chart this along line towards two dire?
  #1
prayskyer
Guest
 
Posts: n/a
how i can chart this coordinate along this line towards two directions?

the X Direction coordinate is :there is a orign point=0, left side<0, right side>0.

my question is how that happen in CFX-POST? THANKS A LOT

  Reply With Quote

Old   October 8, 2006, 08:45
Default Re: how i can chart this along line towards two di
  #2
TB
Guest
 
Posts: n/a
Assuming that you are charting velocity vs position:

1)Create a Line (under Location) using 2-point method etc.

2)Create a Chart, Select Type "XY", Define position as X-axis variable & velocity as Y-axis variable.
  Reply With Quote

Old   October 8, 2006, 21:45
Default Re: how i can chart this along line towards two di
  #3
prayskyer
Guest
 
Posts: n/a
thanks for your replying~!

sure,i creat a line using two points,and the X axis variable is the position along this line,~

but the problem is the "0" is the mid of the line, and the left side is negtive,and right side is positive,~

how can i deal with this? thanks a lot~
  Reply With Quote

Old   October 9, 2006, 01:37
Default Re: how i can chart this along line towards two di
  #4
TB
Guest
 
Posts: n/a
You want to shift the zero reference point to the other side of your line, don't you? If so, just create a new variable of say "Pos" and let the value be X+Xneg, where Xneg is the most negative value. Select Pos as your X-axis variable then.
  Reply With Quote

Old   October 9, 2006, 02:16
Default Re: how i can chart this along line towards two di
  #5
prayskyer
Guest
 
Posts: n/a
yes,i get what you mean~!

thinking of that line,if that is a curve,should i apply that coordinate transform,ture the curve to line?

and what are these really about,should i find some papers or books to find out?could you introduce some for me,really thanks
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem with Gmsh nishant_hull Open Source Meshers: Gmsh, Netgen, CGNS, ... 18 April 22, 2015 08:43
OpenFOAM 1.7.1 installation problem on OpenSUSE 11.3 flakid OpenFOAM Installation 16 December 28, 2010 09:48
Regarding FoamX running Kindly help out hariya03 OpenFOAM Pre-Processing 0 April 18, 2008 04:26
Axisymmetrical mesh Rasmus Gjesing (Gjesing) OpenFOAM Native Meshers: blockMesh 10 April 2, 2007 14:00
error while compiling the USER Sub routine CFD user CFX 3 November 25, 2002 16:16


All times are GMT -4. The time now is 05:28.