CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

2D setup and 2D profile data file in CFX10

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 29, 2006, 03:19
Default 2D setup and 2D profile data file in CFX10
  #1
Se-Hee
Guest
 
Posts: n/a
Hi! I am trying to simulate 2D heat transfer problem. Here, I have a few questions for my CFX setup as follows:

1. I generated one layer mesh by using extruded method. I think the mesh is OK. But, I am not sure what I need to setup more for 2D in CFX. Otherwise, how can CFX know this problem is 2D category?

2. My profile data, myProfile.csv, is as ===================================== [Name] wire heat

[Spatial Fields] x [m], y [m]

[Data] x [m], y [m], heat source [W m^-3] 0.1, 0.1, 3 0.2, 0.2, 4 … … ===================================== Is it correct setup for 2D profile?

I highly appreciate if you can provide me any comments and tips.

Thanks, Se-Hee

  Reply With Quote

Old   October 29, 2006, 03:24
Default 2D setup and 2D profile data file in CFX10
  #2
Se-Hee
Guest
 
Posts: n/a
Hi! I am trying to simulate 2D heat transfer problem. Here, I have a few questions for my CFX setup as follows:

1. I generated one layer mesh by using extruded method. I think the mesh is OK. But, I am not sure what I need to setup more for 2D in CFX. Otherwise, how can CFX know this problem is 2D category?

2. My profile data, myProfile.csv, is as

[Name]

wire heat

[Spatial Fields]

x [m], y [m]

[Data]

x [m], y [m], heat source [W m^-3]

0.1, 0.1, 3

0.2, 0.2, 4

…..

….

Is it correct setup for 2D profile?

I highly appreciate if you can provide me any comments and tips.

Thanks, Se-Hee

  Reply With Quote

Old   October 30, 2006, 09:48
Default Re: 2D setup and 2D profile data file in CFX10
  #3
Robin
Guest
 
Posts: n/a
Hi Se-Hee,

Your profile is fine. The solver doesn't actually "know" your problem is 2D, but if you specify the sides as symmetry planes, the solution itself will be two dimensional.

Make sure you use symmetry planes and don't specify the sides a "Free Slip" walls. The latter will make the flow parallel to the walls, but the solution will only be first order accurate.

If the model is axisymmetric and has a swirl component, use a periodic interface between the sides instead.

Regards, Robin
  Reply With Quote

Old   October 30, 2006, 10:49
Default Re: 2D setup and 2D profile data file in CFX10
  #4
Se-Hee
Guest
 
Posts: n/a
Hi Robin,

Thanks for your confirmation. I will check my setup.

Have a great day!

Many thanks, Se-Hee
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 02:38.