CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

New to CFX-need explanations about mesh parameters

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 23, 2006, 10:56
Default New to CFX-need explanations about mesh parameters
  #1
Cyril
Guest
 
Posts: n/a
Hi all, I'm new to CFX and I'm working on a wing.

I set up some parameters to resh a face of the volume with these parameters: Relative error 0.09, Minimum edge: 5, Maximum edge: 20, Radius of influence: 0, Expansion factor: 1.2. The problem is that I have to make a report, and I don't know how to explain why I've chosen relative error instead of constant, what does means radius of influence...

(I've chosen these parameters just with the feeling, trying differents settings, and stopping on a "not too bad" one. Here is my mesh: http://img88.imageshack.us/img88/9420/08mesh4ew0.png

could you help me to explain what these parameters mean for the mesh ?

Thank you very much !!

Cyril

  Reply With Quote

Old   November 23, 2006, 11:32
Default Re: New to CFX-need explanations about mesh parame
  #2
Robin
Guest
 
Posts: n/a
Cyril,

Read the documentation.

-Robin
  Reply With Quote

Old   November 23, 2006, 21:12
Default Re: New to CFX-need explanations about mesh parame
  #3
Cyril
Guest
 
Posts: n/a
I don't have it (I'm a student, and the teacher is not so good...)
  Reply With Quote

Old   November 24, 2006, 07:33
Default Re: New to CFX-need explanations about mesh parame
  #4
Johnny
Guest
 
Posts: n/a
The documentation can be found under the help menu in CFX Mesh.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Moving mesh Niklas Wikstrom (Wikstrom) OpenFOAM Running, Solving & CFD 122 June 15, 2014 07:20
Mesh Adaption in CFX. Kushagra Mittal CFX 1 August 31, 2011 09:17
CFX Mesh Deformation problem Silmaril CFX 7 October 19, 2010 11:00
Create moving mesh without simulating (CFX) spatialtime ANSYS 2 July 22, 2010 11:30
Convergence moving mesh lr103476 OpenFOAM Running, Solving & CFD 30 November 19, 2007 15:09


All times are GMT -4. The time now is 06:50.