CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

How to import gtm-file into icem?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 5, 2006, 07:04
Default How to import gtm-file into icem?
  #1
Aloise
Guest
 
Posts: n/a
Hi,

I have a gtm-file, that can be read in cfx-pre. But I need to modify the coordinate-axis direction and the names of the mesh-surfaces.

How can I reimport the gtm-file into ICEM V10 to make the modifications?

Thanks, Aloise
  Reply With Quote

Old   December 5, 2006, 10:15
Default Re: How to import gtm-file into icem?
  #2
Robin
Guest
 
Posts: n/a
Write a def file out of Pre, then load the def file into ICEM CFD. Just create a dummy domain to do so.

-Robin
  Reply With Quote

Old   December 5, 2006, 14:09
Default Re: How to import gtm-file into icem?
  #3
Aloise
Guest
 
Posts: n/a
Thanks,

I did it that way, but I thought there must be another one.

-Aloise
  Reply With Quote

Old   December 5, 2006, 14:17
Default Re: How to import gtm-file into icem?
  #4
Aloise
Guest
 
Posts: n/a
Now I`m importing the def-file via file-import mesh-from CFX5 But do you know what "Set face parts from": BC Patches or Surface means?

The entry in the helpfile didn`t help me a lot.

-Aloise
  Reply With Quote

Old   December 10, 2006, 20:24
Default Re: How to import gtm-file into icem?
  #5
Robin
Guest
 
Posts: n/a
There are two types of 2D regions in the def file, the boundary regions and your mesh regions (which may or may not be used for the boundar regions). The dialog is simply asking which you want to appear in ICEM CFD.

-Robin
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
paraview installation woes vex OpenFOAM Installation 15 January 30, 2011 08:11
Problem in IMPORT of ICEM input file in FLUENT csvirume FLUENT 2 September 9, 2009 02:08
[Gmsh] Compiling gmshFoam with OpenFOAM-1.5 BlGene OpenFOAM Meshing & Mesh Conversion 10 August 6, 2009 05:26
ParaView Compilation jakaranda OpenFOAM Installation 3 October 27, 2008 12:46
error while compiling the USER Sub routine CFD user CFX 3 November 25, 2002 16:16


All times are GMT -4. The time now is 04:48.