CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

Initial Conditions

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 29, 2006, 13:39
Default Initial Conditions
  #1
Martin
Guest
 
Posts: n/a
Hello there,

I want to simulate the transient mixing behaviour in an agitator vessel. Inside the vessel exists a rotating domain which is assign as a frozen rotor and the connection surfaces between this volume an the sorrounding static domain are assigned as interfaces. so far my settings should be correct. To start the simulation I assign initial conditiones to both domains. To simulate the mixing process from beginning I chose for all velocity components zero as initialisation. same for the relativ pressure. the turbulence kinetic energy is assigned as automatic and turbulance eddy dissipation is choosen. after starting the solver there are no residuals drawn in the graph and the only value that is calculated is the wallscale factor. what is wrong? why doesnt the solver calculate velocities? Anyone can help me?
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Floating point exception error Alan OpenFOAM Running, Solving & CFD 10 April 6, 2012 14:02
Error while running rhoPisoFoam.. nileshjrane OpenFOAM Running, Solving & CFD 8 August 26, 2010 12:50
MRFSimpleFoam amp cyclic patches david OpenFOAM Running, Solving & CFD 36 October 21, 2008 21:55
Differences between serial and parallel runs carsten OpenFOAM Bugs 11 September 12, 2008 11:16
Unknown error sivakumar OpenFOAM Pre-Processing 9 September 9, 2008 12:53


All times are GMT -4. The time now is 12:14.