How to mprove quality of Mesh

January 11, 2007, 06:56

Hi,

I have done hexa mesh to a model & converted it to Unstructed Mesh.I checked for Quality of Mesh.

Determinate ->0.58

Aspect-Ratio->0.1 (minimum)

Minimum Angle -> 4.7

but i wanted the above parameters with following values please tell me how to improve it.

Determinate -> 0.65

Aspect-Ratio-> 14(minimum)

Minimum Angle -> 13

Advanced Thanks & regards aero

January 11, 2007, 08:52

Which software are you using?

Fusion

January 11, 2007, 15:33

Hello, how can I watch those parameters in ICEM ? Thanks santiago

January 12, 2007, 02:54

Under the tab "Edit Mesh" -> "Display Mesh Quality", you can select many quality criteria.

Fusion

January 14, 2007, 07:26

have a look at ansys web, you'll find demo room for ICEM. Go through the videos. I did learn a lot about the mesh handling there.

matej

January 16, 2007, 06:35

to improve the aspect ratio you will have to either increase/decrease the number of nodes in the long/transverse direction. Angle can be improved by assuring that paralles edges have an identical distribution of nodes. And adjacent edges have almost equal first node distance at the common node.

January 11, 2007, 06:56	How to mprove quality of Mesh	#1
aero Guest Posts: n/a	Hi, I have done hexa mesh to a model & converted it to Unstructed Mesh.I checked for Quality of Mesh. Determinate ->0.58 Aspect-Ratio->0.1 (minimum) Minimum Angle -> 4.7 but i wanted the above parameters with following values please tell me how to improve it. Determinate -> 0.65 Aspect-Ratio-> 14(minimum) Minimum Angle -> 13 Advanced Thanks & regards aero

January 11, 2007, 08:52	Re: How to mprove quality of Mesh	#2
Fusion Guest Posts: n/a	Which software are you using? Fusion

January 11, 2007, 15:33	Re: How to mprove quality of Mesh	#3
Santiago Orrego. Guest Posts: n/a	Hello, how can I watch those parameters in ICEM ? Thanks santiago

January 12, 2007, 02:54	Re: How to mprove quality of Mesh	#4
Fusion Guest Posts: n/a	Under the tab "Edit Mesh" -> "Display Mesh Quality", you can select many quality criteria. Fusion

January 14, 2007, 07:26	Re: How to mprove quality of Mesh	#5
matej Guest Posts: n/a	have a look at ansys web, you'll find demo room for ICEM. Go through the videos. I did learn a lot about the mesh handling there. matej

January 16, 2007, 06:35	Re: How to mprove quality of Mesh	#6
Luke Guest Posts: n/a	to improve the aspect ratio you will have to either increase/decrease the number of nodes in the long/transverse direction. Angle can be improved by assuring that paralles edges have an identical distribution of nodes. And adjacent edges have almost equal first node distance at the common node.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] Low quality Tet prism mesh	saisanthoshm88	ANSYS Meshing & Geometry	17	September 28, 2016 16:50
3D Hybrid Mesh Errors	DarrenC	ANSYS Meshing & Geometry	11	August 5, 2013 06:42
[ICEM] Generating Mesh for STL Car in Windtunnel Simulation	tommymoose	ANSYS Meshing & Geometry	48	April 15, 2013 04:24
fluent add additional zones for the mesh file	SSL	FLUENT	2	January 26, 2008 11:55
Icemcfd 11: Loss of mesh from surface mesh option?	Joe	CFX	2	March 26, 2007 18:10