CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

CFX-Solver graphics doubt.

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 14, 2007, 13:48
Default CFX-Solver graphics doubt.
  #1
Santiago Orrego.
Guest
 
Posts: n/a
Hello.

When I make an analysis with CFX-Solver, the tab of Momentum and Masss,begin to graphic the variables (mass, momentum, velocity...).

The shape of how is lines decrease to achieve the covergence, has any interpretation?

What is the interpretation of the lines (graphics) of the SOlver?

Thanks Santiago.
  Reply With Quote

Old   January 14, 2007, 19:16
Default Re: CFX-Solver graphics doubt.
  #2
Glenn Horrocks
Guest
 
Posts: n/a
Hi,

Read the documentation.

Glenn Horrocks
  Reply With Quote

Old   January 15, 2007, 08:17
Default Re: CFX-Solver graphics doubt.
  #3
Andres Bernal Ortiz
Guest
 
Posts: n/a
Mr. Glenn, If you allows me, i've two questions?

1) Is there any page where I can find pressure distribution for an airfoil at Re 3e6 at alpha 4 degree?

2) How to set the transition model in CFX and the transition point?

thanks,

Andres. Colombia.
  Reply With Quote

Old   January 17, 2007, 17:19
Default Re: CFX-Solver graphics doubt.
  #4
Glenn Horrocks
Guest
 
Posts: n/a
Hi,

I assume this point is not related to this thread, in future you should start another thread.

1) Pressure distribution: There is lots of airfoil data on the web, you just need some patience and access to google to find it.

2) You can set the transition point. This is discussed in the documentation: CFX modelling, page 103.

Glenn Horrocks
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
viewing cfx post while working on cfx solver manager HMR CFX 5 March 9, 2011 23:33
Working directory via command line Luiz CFX 4 March 6, 2011 21:02
[ICEM] trouble with mesh quality from ICEM in CFX Solver escher25 ANSYS Meshing & Geometry 0 February 28, 2011 08:38
CFX 11 x64 solver? problem Attesz CFX 6 June 7, 2009 08:37
problem in CFX solver about isolated volumes Yuan CFX 2 August 16, 2004 22:54


All times are GMT -4. The time now is 10:45.