CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

Mismatch nodes on periodic face>tolerance

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 16, 2007, 22:54
Default Mismatch nodes on periodic face>tolerance
  #1
chotet
Guest
 
Posts: n/a
above is my problem after generating surface mesh.are there any problem if i still continue with the analysis if i have the above problem?will it be any problem occuring the solver later? thank you...
  Reply With Quote

Old   January 19, 2007, 00:26
Default Re: Mismatch nodes on periodic face>tolerance
  #2
Johnny
Guest
 
Posts: n/a
You won't be able to use a 1:1 match for the periodic interface in CFX - you will need to use GGI.
  Reply With Quote

Old   January 19, 2007, 09:37
Default Re: Mismatch nodes on periodic face>tolerance
  #3
Joe
Guest
 
Posts: n/a
Not so.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
SIMPLE algorithm SamR Main CFD Forum 13 January 28, 2016 09:24
Symmetry and Periodic boundary conditions CFD_Fluent_User FLUENT 1 October 16, 2014 02:18
error: no periodic nodes on thread __. HELP !!! bne FLUENT 0 June 20, 2007 11:57
meshing F1 front wing Steve FLUENT 0 April 17, 2003 12:37
CFX4.3 -build analysis form Chie Min CFX 5 July 12, 2001 23:19


All times are GMT -4. The time now is 17:30.