CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   CFX (https://www.cfd-online.com/Forums/cfx/)
-   -   regular cfx-mesh (https://www.cfd-online.com/Forums/cfx/23578-regular-cfx-mesh.html)

Kieran Hood January 29, 2007 18:09

regular cfx-mesh
 
Hi, I've been trying to create a mesh for a rectangular duct using cfx-mesh. I want the mesh to be made up of rectangular elements (if i was using ansys to create the mesh I'd use the hexagonal and mapping options), does anyone know how to do this using cfx-mesh? Thanks in advance, Kieran

Johnny January 29, 2007 22:04

Re: regular cfx-mesh
 
CFX Mesh only makes tetra/prism meshes. It is possible to get some hex elements by doing a 2D extrusion of an inflation layer, but it is not possible to have a fully structured, mapped hex mesh. You need to use ICEM Hexa for that.

Michael B January 30, 2007 07:51

Re: regular cfx-mesh
 
CFX 11 can! See plot. http://lh3.google.com/image/michaelb...d01%281%29.jpg

khairul masitah February 1, 2007 11:19

Re: regular cfx-mesh
 
i want to know how to do a mesh on a vehicle surface



All times are GMT -4. The time now is 02:56.