CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

Modelling of diaphragm for moving mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 14, 2007, 01:16
Default Modelling of diaphragm for moving mesh
  #1
skarp
Guest
 
Posts: n/a
Hi Friends

Can any one tell me how to model diaphragm for moving mesh
  Reply With Quote

Old   February 14, 2007, 21:31
Default Re: Modelling of diaphragm for moving mesh
  #2
Glenn Horrocks
Guest
 
Posts: n/a
Hi,

Doing some tutorials sounds like a good start.

Glenn Horrocks
  Reply With Quote

Old   February 14, 2007, 22:55
Default Re: Modelling of diaphragm for moving mesh
  #3
skarp
Guest
 
Posts: n/a
Hi

I found a tutorial with moving mesh on a ball. But in diaphragm the sides are only fixed and the middle position is subject to movement. one side of the diaphragm is exposed to atmospheric pressure and other to a vacuum.
  Reply With Quote

Old   February 15, 2007, 16:28
Default Re: Modelling of diaphragm for moving mesh
  #4
Glenn Horrocks
Guest
 
Posts: n/a
Hi,

This is starting to sound like a FSI simulation. Version 11 (which was released a few days ago) has extensive enhancements in FSI and a few tutorials. I recommend you try it in Version 11.

Glenn Horrocks
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Number of cells in mesh don't match with size of cellLevel colinB OpenFOAM Native Meshers: snappyHexMesh and Others 9 November 2, 2011 03:50
Converting Starccm+ mesh Ladnam OpenFOAM 0 September 14, 2011 06:30
snappyHexMesh won't work - zeros everywhere! sc298 OpenFOAM Native Meshers: snappyHexMesh and Others 2 March 27, 2011 21:11
Icemcfd 11: Loss of mesh from surface mesh option? Joe CFX 2 March 26, 2007 18:10
2D Modelling using unstructured mesh Yingchun CFX 8 December 12, 2005 06:05


All times are GMT -4. The time now is 09:49.