meshing problems with CFX 10

March 15, 2007, 15:31

Hi all,

I'm a beginner in CFD, I have a problem of meshing with CFX10. I've drawn a car on CATIA and all my parts are able to be mesh separately (with the a face spacing of min:2,max:120) The problem is that when I want to mesh my assembly englobed by an air volume (200mm) or when I use a max spacing of 160, many errors appear. I would like to know which parameter(s) I've to change or if it exists a solution to specify a manuel meshing...

thanks a lot,

cedric PERE

March 15, 2007, 18:09

http://www.cfd-online.com/Wiki/Ansys...ible_answer.3F

March 15, 2007, 15:31	meshing problems with CFX 10	#1
Cedric PERE Guest Posts: n/a	Hi all, I'm a beginner in CFD, I have a problem of meshing with CFX10. I've drawn a car on CATIA and all my parts are able to be mesh separately (with the a face spacing of min:2,max:120) The problem is that when I want to mesh my assembly englobed by an air volume (200mm) or when I use a max spacing of 160, many errors appear. I would like to know which parameter(s) I've to change or if it exists a solution to specify a manuel meshing... thanks a lot, cedric PERE

March 15, 2007, 18:09	Re: meshing problems with CFX 10	#2
Joe Guest Posts: n/a	http://www.cfd-online.com/Wiki/Ansys...ible_answer.3F

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] Blade meshing in ICEM CFX	pol84	ANSYS Meshing & Geometry	3	August 5, 2010 17:19
CFX meshing tutorials parasolid files	Tanveer ahmad Rubani	CFX	1	February 27, 2009 04:46
Problem with meshing long, thin faces in CFX	Martin	CFX	3	January 8, 2009 20:51
Problems modeling CONTACT SURFACES with CFX Mesh	MAldaz	CFX	2	September 12, 2006 17:10
Question about meshing / solution scheme of CFX	Coriolius	CFX	8	August 1, 2004 18:39