CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

The whole partition per one kernel

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 17, 2007, 07:01
Default The whole partition per one kernel
  #1
Michael Skoblin
Guest
 
Posts: n/a
Hello to everybody. A parallel run for 4 partitions (one partition per each kernel) is started. During the run CFX calls my CEL Fuinction having at input locations corresponding to a given partition. However, sometimes, when the mesh is rather dense, one and the same partition is NOT developed at once, but at least two calls occur for the partition (of course, each time different set of locations). This slows down the overall performance of my model dramatically. Is there any way to make ANSYS call my CEL Function having at the input ALL the locations of a partition at once? Thanks!
  Reply With Quote

Old   March 17, 2007, 07:10
Default Re: The whole partition per one kernel
  #2
Joe
Guest
 
Posts: n/a
No.

Remember the multiple calls are to smaller subsets of the partition not multiple calls over the whole partition.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Use of Partition file Chander CFX 2 October 9, 2011 09:56
How to partition EDGES by using METIS Lupocci Main CFD Forum 0 August 18, 2010 18:43
Fluent 6.3.26 vs 12.1 and partition method Anorky FLUENT 0 April 27, 2010 11:55
Ignore cells on partition boundary Karl FLUENT 7 May 11, 2002 23:12
partition problem ... Levent FLUENT 0 October 16, 2001 04:26


All times are GMT -4. The time now is 02:28.