CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

Insufficient Memory Allocated-error

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 26, 2007, 16:16
Default Insufficient Memory Allocated-error
  #1
Juan Catelén
Guest
 
Posts: n/a
I'm having this message while I was trying to make a transient simulation: *** INSUFFICIENT MEMORY ALLOCATED *** | Action required : Increase the integer stack memory size. If the situation persists please contact the CFX Customer Helpline giving the following details: Requested space: 1151286 words | Current allocated space: 1653034 words | | Current used space: 1086470 words | | Current free space: 566564 words | | Number of free areas: 1 What can I do? I have a lot of free memory and I hace tried to make the run in another folder and with a new archive but I always had the same problem.
  Reply With Quote

Old   March 26, 2007, 17:40
Default Re: Insufficient Memory Allocated-error
  #2
Joe
Guest
 
Posts: n/a
Increase the integer stack size in the solver parameters page of the CFX solver manager
  Reply With Quote

Old   April 4, 2007, 03:57
Default Re: Insufficient Memory Allocated-error
  #3
Sameer
Guest
 
Posts: n/a
Hi Juan. I was also facing the same problem. I tried with increasing integer stack size in solver parameters page but still failed. In my problem there are two domains- one rotating and one stationary. I made changes in settings of domain interface-changed rotational offset value and set pitch change to none. If yours is same kind of problem you can try with this.

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Compile calcMassFlowC aurore OpenFOAM Programming & Development 12 March 18, 2014 05:22
Compile problem ivanyao OpenFOAM Running, Solving & CFD 1 October 12, 2012 09:31
Problem with compile the setParabolicInlet ivanyao OpenFOAM Running, Solving & CFD 6 September 5, 2008 20:50
Compiling problems with hello worldC fw407 OpenFOAM Installation 21 January 6, 2008 18:38
user subroutine error CFDUSER CFX 2 December 9, 2006 07:31


All times are GMT -4. The time now is 00:28.