how to get back deleted block in icem
 

Hi everybody, I have mistakenally deleted one block. Can I get that block again? Pls help Thanks in advance.

Re: how to get back deleted block in icem
 

Undo command and/or revert to saved copy.

Re: how to get back deleted block in icem
 

Thanks Joe but if i have saved that then there will not be undo. pls let me know abt revert to saved copy. How to do that?

Re: how to get back deleted block in icem
 

The block you have deleted is actually not really deleted. They are put in a part called "VORFN". Turn on it you will see a lot of blocks. Move the one you would like to recover from "VORFN" to "SOLID". Then you will have it back.

Re: how to get back deleted block in icem
 

Further to the comment from longbow:

Depending on the complexity of your modell, you may find it difficult to determine excatly which block is the one you would like to recover. If this is the case, try using the index system to limit the number of visible blocks to the are of interest. If while doing this you are not able to see your block then you may have limited the visible are to much, thus making the bock you're looking for invisible. In ths situation try increasing the number of visible blocks in a controlled fashion using the index system.

An alternative method is to hunt for the command in the command window which led to deletion of the block in question. Within that command you should see the block number. I don't have ICEM open so I can't quite remember how to undelete the block with the number, but I know it's possible.

Re: how to get back deleted block in icem
 

thanks longblow and nick i will try it.

Re: how to get back deleted block in icem
 

If you can't retrieve the block from VORFN - you can also simply re-build the block from the existing vertices. Blocking > Create Block > From Vertices

thanks all :D