CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   Strange messages at the end of CFX .out file (http://www.cfd-online.com/Forums/cfx/23863-strange-messages-end-cfx-out-file.html)

Albi April 16, 2007 09:44

Strange messages at the end of CFX .out file
 
I have found these strange messages at the end of the CFX .out file:

GETCORE stacktrace 1 get_UCOEF_TURB, ,DENSITY_FL1,BELG263/VERTEX,LATEST 2 get_UCOEF_TURB, ,VISCDYN_FL1,BELG263/VERTEX,LATEST 3 get_YPLUS_TURB, ,DENSITY_FL1,BELG263/VERTEX,LATEST 4 get_YPLUS_TURB, ,VISCDYN_FL1,BELG263/VERTEX,LATEST 5 get_YPLUS_TURB, ,YNODE_FL1,BELG263/VERTEX,LATEST

Anyway the solver writes the .res file.

What these messages refers to?

Thanks!!!

opaque April 16, 2007 12:17

Re: Strange messages at the end of CFX .out file
 
Dear Albi,

Please contact your ANSYS CFX help representative, and explain your problem. Which version are you using 11.0?. If so, the help desk can test 11.0 Update 1 to check if a similar issue has already been reported/fixed.

If you are interested. The variable gathering system for the CFX solver has failed while computing Wall Transfer Coefficient for the momentum equation at the end of the run, and the stacktrace is a list of incomplete internal calls due to this failure.

Which turbulent model were you running, SST?

Opaque.


Albi April 17, 2007 02:17

Re: Strange messages at the end of CFX .out file
 
The turbolent model is the K-epsilon and "heat transfer" is set to none.

I use the version 10.0.

thank you very much for your help, i'll try to reinstall CFX whit the SP1.



All times are GMT -4. The time now is 10:38.