CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

Looking for coal combustion people

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 23, 2007, 01:46
Default Looking for coal combustion people
  #1
Chetan Prahsant
Guest
 
Posts: n/a
Hey Friends,

I am involving in Pulverized Coal combustion project, facing difficulties in giving coal conditions in CFX. Here i m looking for people who have done coal combustion work on CFX. please help me.

Chetan Prashant

  Reply With Quote

Old   April 23, 2007, 07:59
Default Re: Looking for coal combustion people
  #2
Dr. Flow Squad
Guest
 
Posts: n/a
Hi. I'm Undergoing coal combustion simulations right now, but I'm doing it in Fluent and with some difficulties.
I was wondering if it was better doing it in CFX.
If a group network in coal combustion in CFD where to be created, count me in.
- Dr. Flow Squad
  Reply With Quote

Old   April 23, 2007, 09:57
Default Re: Looking for coal combustion people
  #3
myron
Guest
 
Posts: n/a
I'm sure the guys at Combustion Science Engineering (www.csefire.com) would be happy to consult with you on this. I think they have access to and use most of the major codes.
  Reply With Quote

Old   April 24, 2007, 00:49
Default Re: Looking for coal combustion people
  #4
Ben
Guest
 
Posts: n/a
I am working on modelling of PCI combustion in BF using CFX. I am happy to cooperate with u.
  Reply With Quote

Old   April 26, 2007, 06:00
Default Re: Looking for coal combustion people
  #5
chetan prashant
Guest
 
Posts: n/a
hey ben, thanks for come up for helping me. i m working on pulverized coal tangential fired boiler. i have taken k-epsilon model for turbulence, Discrete transfer radiation model, eddy-dissipation model for combustion, single reaction devolatilization, field model for char combustion, particle transport and Nox Model. 500 iterations have been completed in second phase. After studying imbalance data, only O2 mass fraction is having max imbalance (544%). Other quantities are moving towards convergence. In initial iterations, mach no was high (6) and it was reduced after some iteration. Is it normal in combustion problem?

Chetan Prashant
  Reply With Quote

Old   April 26, 2007, 20:36
Default Re: Looking for coal combustion people
  #6
Ben
Guest
 
Posts: n/a
Hi Chetan, you model formulation seems fine. Two points: (1) try decreasing timescale (2) try re-confirming your geometry for Mach No problem

ben
  Reply With Quote

Old   April 27, 2007, 01:15
Default Re: Looking for coal combustion people
  #7
Chetan Prahsant
Guest
 
Posts: n/a
hi ben, i took timescale one. what should be timescale value in combustion problem and explain second point which you made.

Chetan Prashant
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
hydrocarbon gases + Boron particle combustion nileshjrane OpenFOAM 1 December 13, 2010 07:20
Modelling Combustion in Porous Zone tanjinjack FLUENT 0 November 19, 2010 12:23
Hydrogen Air combustion in a combustion chamber popi CFX 7 July 11, 2007 19:40
Need Similar Combustion Tutorial as my model Arnab CD-adapco 0 May 24, 2005 19:23
Multiresolution + Turbulence + Combustion Raul Phoenics 1 March 31, 2005 08:51


All times are GMT -4. The time now is 01:05.