CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

meshing tips for a rotating cylindrical jar....

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 16, 2007, 05:39
Default meshing tips for a rotating cylindrical jar....
  #1
Jaswi
Guest
 
Posts: n/a
Dear friends..

I am new to ICEMCFD and need some help..

I have a rotating cylindrical jar with eccentricity. I have made the geometry (easy step i know ) and now need some clues as how to mesh it . Basically the geometry has two parts:

-->The rotating wall i.e. the jar itself: named-->WALL -->The opening :named --> ATMOSPHERE

Professionals pleeeeeaaaase provide some clues...

Thanks a TON Jaswi
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Tips of ICEM CFD meshing speed up CFD_D_BOY ANSYS Meshing & Geometry 1 September 7, 2011 02:53
[ICEM] Rotating Tyre Meshing gav ANSYS Meshing & Geometry 12 July 22, 2011 03:22
6DOF in dynamic meshing & Rotating Frame xhield ANSYS 0 October 25, 2009 05:02
DES and LES meshing: tips and advice? James M FLUENT 3 June 24, 2007 20:22
dynamic meshing, rotating moving mesh...... madhan FLUENT 1 January 24, 2007 00:55


All times are GMT -4. The time now is 12:30.