CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

Combustion

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 14, 2007, 09:07
Default Combustion
  #1
Reine Granstr├Âm
Guest
 
Posts: n/a
Hi. I am using CFX-11 trying to model combustion of a Methane-air mixture in a room. The boundary condition I'm trying to set up is a mass flow of gas mixture flowing normal into the domain through a circular surface in the floor of the room.

It's only possible to specify the mass flow as the b.c. The problem is that I want to set a specific heat release rate of 67.9 kW. I haven't found a way to figure out the energy release of the methane-air mixture in CFX-11 in this situation. I'm basically trying to set up the combustion simulation in the same way as Tut. 18 in CFX-11. That is, with a single-step complete combustion (Methane Air WD1 NO PDF), using the existing "Methane Air Mixture" and Eddie Dissipation combustion model.

So, if anyone has any ideas how to calculate the energy released by i.e. 1 kg of methane-air mixture in this type of combustion, it would be very appreciated.

Thanks Reine Granstr÷m
  Reply With Quote

Old   June 19, 2007, 15:28
Default Re: Combustion
  #2
Joey2007
Guest
 
Posts: n/a
Have a look at the possible approaches to formulate the energy balance equations in combustion cases (if I remind correctly the book of Veynante and Poinsot presents both approaches). CFX defines energy as sum of heat and formation enthalpy. Within this approach you have no source term for chemical reaction in the energy transport equation. The specific heat release results simply from the enthalpy definitions of reactants and products.

With other words: due to the very convient approach of CFX its not required to waste the enthalpy of your brain for defining a heat release.
  Reply With Quote

Old   July 6, 2007, 02:40
Default Re: Combustion
  #3
ELAYARAJA.R
Guest
 
Posts: n/a
Sir,

i am ME ENERGY ENGG student, i have interest for doing my project in COMBUSTION ANALYSIS IN GAS TURBINE , i have question about how to do and it is possible to do by using CFX or any other packages should need for this analysis?
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
hydrocarbon gases + Boron particle combustion nileshjrane OpenFOAM 1 December 13, 2010 07:20
Modelling Combustion in Porous Zone tanjinjack FLUENT 0 November 19, 2010 12:23
Hydrogen Air combustion in a combustion chamber popi CFX 7 July 11, 2007 18:40
Need Similar Combustion Tutorial as my model Arnab CD-adapco 0 May 24, 2005 18:23
Multiresolution + Turbulence + Combustion Raul Main CFD Forum 0 March 18, 2005 08:53


All times are GMT -4. The time now is 02:07.