CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Continumm flow with slip boundary conditions !!

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 14, 2007, 10:26
Default Continumm flow with slip boundary conditions !!
  #1
Sohag
Guest
 
Posts: n/a
Hello Everybody!!, I am a new users of CFX. Now I would like to simulate gaseous continumm flow in a microchannel(1.2 micron by 3000 micron).We know Knudsen Number Kn <0.001 for continumm flow; 0.001<Kn<0.1 for slip flow and 0.1<Kn<10 for transition flow. Also I need to use slip condition on walls(top and bottom). In case of noslip condition the velocity on the wall is u = 0 but for slip flow velocity on the wall is u = kn*(delu/deln), where kn=lamda/H, is the knudsen number. H is the height of the channel,Lamda is the mean free path, n is the normal coordinate pointing inward from the channel wall. Is it work if write(delu/deln) in CEL of CFX? Please give me informations how can I do it.

Yours Truly Sohag Korea

  Reply With Quote

Old   June 14, 2007, 10:51
Default Re: Continumm flow with slip boundary conditions !
  #2
Sohag
Guest
 
Posts: n/a
Sorry my previous problem is not complete.I want to use Knudsen Number Kn <0.001 for continumm flow, 0.001<kn<0.1 for slip flow and 0.1<Kn<10 for transition flow.Also for slip flow velocity on the wall is u=kn*(delu/deln), where kn=lamda/H is the knudsen number,H is the height of the channel,lamda is the mean free path and n is the normal coordinate pointing inward from the channel wall.So How can I use this conditions.Is it possible to write slip condition in CEL of CFX? How can I write (delu/deln)in CEL expressions? I am very grateful to him if any body help me about my problem. Yours Truly Sohag
  Reply With Quote

Old   June 14, 2007, 10:56
Default Re: Continumm flow with slip boundary conditions !
  #3
Sohag
Guest
 
Posts: n/a
what is the problem I do not know.I sens full problems but only 1 or 2 line have shown.

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wind turbine simulation Saturn CFX 58 July 3, 2020 02:13
mass flow in is not equal to mass flow out saii CFX 12 March 19, 2018 06:21
Low Speed Flow Boundary Conditions Paul Bateman FLUENT 2 January 10, 2013 14:01
Open Channel Flow Boundary Conditions TWaung STAR-CCM+ 2 October 7, 2011 01:37
Boundary Conditions for Incompressible Flow Bob FLUENT 0 April 7, 2006 22:28


All times are GMT -4. The time now is 21:52.