CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

maximum size for tetra mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 5, 2007, 10:59
Default maximum size for tetra mesh
  #1
arya
Guest
 
Posts: n/a
Hi all,

I am learning how to use ICEM CFD 11, and have some questions

What is the difference between assigning the value for maximum size in "Mesh size for part" and assigning the value in "Surface mesh setup"? Because I divided my parts also based on the surfaces.

What will happen if I assigned different value for each of those option?

Thanks

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
engrid -> save as .stl with boundarie codes Zymon enGrid 31 August 29, 2011 14:40
ICEM Tetra mesh, Size reduction and Skewness problem Catthan ANSYS Meshing & Geometry 6 December 5, 2010 20:39
unstructure mesh size control near to wall using gambit lalit kumar FLUENT 4 July 6, 2010 16:13
critical error during installation of openfoam Fabio88 OpenFOAM Installation 21 June 2, 2010 04:01
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55


All times are GMT -4. The time now is 07:39.