CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   how to define different regions in icem ? (http://www.cfd-online.com/Forums/cfx/24235-how-define-different-regions-icem.html)

Hammam July 7, 2007 08:40

how to define different regions in icem ?
 
hi guys

in icem i have a planar surface (2d)and i extruded the mesh of this surface by one element but it only extrude the mesh not the curves of the surface and i want to define different regions like inlet,outlet,top bot to solve in cfx but i have only volume side top

side is a composite region consists of the different regions so how to define this regions seperately to apply the boundary conditions to it in cfx ?

n.b: i have read all the previous posts and i didnot get it

thanks

myron July 9, 2007 10:36

Re: how to define different regions in icem ?
 
You must select the surface elements and place them into the desired parts after the extrusion process.

Hammam July 9, 2007 11:38

Re: how to define different regions in icem ?
 
but selection of the surface elemnts is not possible because surfaces is not defined

Hammam July 9, 2007 12:56

Re: how to define different regions in icem ?
 
thank you i made it

thanks


All times are GMT -4. The time now is 07:29.