CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

how to repair geometry by another way

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 16, 2007, 09:58
Default how to repair geometry by another way
  #1
Priscila
Guest
 
Posts: n/a
Friends

I've built a geometry, and when I try to make a mesh, it's appearing a notice I can't continue because my geometry has a hole and ask me if I want to fix it. If I say yes, it goes to Repair Mesh and it appears a red line in my geometry. I don't know what to do after... Someone can help me to repair the geometry (close the hole) by another way? Thanks
  Reply With Quote

Old   July 16, 2007, 10:12
Default Re: how to repair geometry by another way
  #2
myron
Guest
 
Posts: n/a
If you are talking about ICEM CFD - the red line is giving you the 'leakage' path of the mesh. First you need to determine what in the geometry is causing the 'leakage' - then you can figure out how to correct the geometry.
  Reply With Quote

Old   July 16, 2007, 12:16
Default Re: how to repair geometry by another way
  #3
Gert-Jan
Guest
 
Posts: n/a
It appears that you need an additional surface there to close the hole. You can create the surface by selecting the edges and select submit.

I recommend to do this in the "geometry menu" before you go to the "meshing menu". Just make all surfaces "solid" to see if someting is missing, close all gaps and off you go.

Good luck, Gert-Jan
  Reply With Quote

Old   July 17, 2007, 11:42
Default Re: how to repair geometry by another way
  #4
Ressel
Guest
 
Posts: n/a
Check if you have defined all surfaces/families and don't forget to verfiy the tolerance if you are working with little geometries.

Ressel
  Reply With Quote

Old   August 2, 2007, 11:43
Default Re: how to repair geometry by another way
  #5
Priscila
Guest
 
Posts: n/a
Thank you guys for your help!!
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[GAMBIT] Geometry repair doodek ANSYS Meshing & Geometry 5 February 10, 2011 15:42
ICEM --- question about repair geometry zhaohui ANSYS Meshing & Geometry 1 April 21, 2010 18:54
repair the geometry in the ANSYS-ICEM feixiangniao ANSYS Meshing & Geometry 3 March 31, 2010 05:53
" your geometry has a hole. Do you want to repair it?" moca ANSYS Meshing & Geometry 1 July 20, 2009 15:30
vitual _ real deneb FLUENT 3 January 22, 2007 05:31


All times are GMT -4. The time now is 10:50.