CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Running in patch when your license is running out

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 8, 2007, 13:25
Default Running in patch when your license is running out
  #1
Andrew
Guest
 
Posts: n/a
I have a frustrating problem trying to run in batch. My license is coming up to its renewal date, and therefore keeps reminding me to renew (Your license expires in X days... etc) which requires an OK click to continue. When running in batch, for each simulation it requires an OK at the start click to start the run. Because of this, I can't set simulations going overnight or at the weekend, as it only runs the first sim on the list!

Does anybody know of a workaround for this?!

Many thanks,

Andrew
  Reply With Quote

Old   August 8, 2007, 19:34
Default Re: Running in patch when your license is running
  #2
Glenn Horrocks
Guest
 
Posts: n/a
Hi,

I too have come across this problem. I agree that this is an extremely stupid thing for ANSYS to have added to the code as it stops you from doing batch jobs. I have pointed this out to our support guys (and they agree it is bad) here several times over the years but it is still in the code. Please, please please remove this ANSYS - or at least make it so it does not stop the job while waiting for the user to press OK.

There is a way to minimise the damage. In windows, set an environment variable called "ans_flexlm_expwarn_days" to a value of 1. Unfortunately you can't turn it completely off but at least you can minimise the damage to the last day only.

Regards, Glenn
  Reply With Quote

Old   August 9, 2007, 14:48
Default Re: Running in patch when your license is running
  #3
Joey2007
Guest
 
Posts: n/a
Hi Andrew, ask the ANSYS support representative. The more often they got the question, the higher the probability that they change it.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Commercial meshers] Using starToFoam clo OpenFOAM Meshing & Mesh Conversion 33 September 26, 2012 05:04
[Other] StarToFoam error Kart OpenFOAM Meshing & Mesh Conversion 1 February 4, 2010 05:38
CheckMeshbs errors ivanyao OpenFOAM Running, Solving & CFD 2 March 11, 2009 03:34
[Gmsh] Import gmsh msh to Foam adorean OpenFOAM Meshing & Mesh Conversion 24 April 27, 2005 09:19
Multicomponent fluid Andrea CFX 2 October 11, 2004 06:12


All times are GMT -4. The time now is 07:40.