CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   Ansys Workbench to ICEM (http://www.cfd-online.com/Forums/cfx/24403-ansys-workbench-icem.html)

Srivatsan August 13, 2007 20:06

Ansys Workbench to ICEM
 
Hello all,

I am pretty new in using ICEM-CFD. I want to know whether ICEM-CFD can read a geometry modelled in ANSYS Workbench.

What has to be done to accomplish this?

Anantha August 14, 2007 00:45

Re: Ansys Workbench to ICEM
 
Hello Mr Srivatsan,

Yes, the DM file can be read directly in ICEM inside the Workbench. Once the model is done and 'generated' go to the 'Project' tab and then choose 'Proceed to Advanced Meshing'. It opens ICEM CFD inside the Workbench itself with the current geometry in DM. Hope this helps you.

Regards Anantha

CycLone August 14, 2007 09:48

Re: Ansys Workbench to ICEM
 
You can also use File>Import Geometry>Workbench Readers within ICEM CFD to load your DM model.

-CycLone


All times are GMT -4. The time now is 21:46.