CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

Opening B.C. display in POST

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 15, 2007, 15:08
Default Opening B.C. display in POST
  #1
Felix
Guest
 
Posts: n/a
Hello,

I use an Opening boundary condition at the exit plane of my domain. In CFX-POST, I want to have a look at the Total Pressure in this plane. What I don't get is that the total pressure is zero everywhere (on this plane) if I use Hybrid values.

As I understand it, specifying the "Opening Pressure and Direction" with a "Relative Pressure = 0[Pa]" is equivalent to specifying a static pressure = 0 for everything going out and a total pressure = 0 for anything coming in.

In that case, what does CFX-POST display ?

Thanks
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Firefox problem: Weird display and inability to post gschaider Site Help, Feedback & Discussions 3 July 22, 2009 04:21
contours display in post process askriitr FLUENT 0 July 1, 2009 10:55
Heat Flux display in CFX post CFDLife CFX 3 July 2, 2008 08:17
ERROR IN OPENING CFX POST VISHNU CFX 6 January 7, 2008 04:21
No display on CFX Pre and Post Dipl.-Ing. Jayadi Lukito CFX 0 May 23, 2007 09:30


All times are GMT -4. The time now is 13:47.