CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

merging edges in ICEM

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 21, 2007, 13:17
Default merging edges in ICEM
  #1
Virag Mishra
Guest
 
Posts: n/a
hi

i have a structured meshing, the problem is that i need to specify equal node distances on my geometry and the edges are splited by various vertices, is there any option to merge the edges about a vertex.
  Reply With Quote

Old   August 22, 2007, 08:04
Default Re: merging edges in ICEM
  #2
mbell12
Guest
 
Posts: n/a
you can manually merge the blocks. that way you will be able to merge the two faces (which describe the blocks), and thus able to remove the vertex
  Reply With Quote

Old   August 22, 2007, 10:12
Default Re: merging edges in ICEM
  #3
Virag Mishra
Guest
 
Posts: n/a
Thanks, The problem actually is that I have deleted the blocks, and this edges belont to the outer end of the blocks is it possible now?

  Reply With Quote

Old   August 22, 2007, 10:41
Default Re: merging edges in ICEM
  #4
myron
Guest
 
Posts: n/a
You can copy the edge distributions from one edge to another - use 'Absolute'. As long as the edges are the same length - the distributions will be the same.
  Reply With Quote

Old   August 24, 2007, 06:06
Default Re: merging edges in ICEM
  #5
Sameer
Guest
 
Posts: n/a
Hey Virag. You may try this. You can transform opposite face of the face you have deleted. This way you will get a complete block.

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
SnappyHexMesh for internal Flow vishwa OpenFOAM Native Meshers: snappyHexMesh and Others 23 August 6, 2014 03:50
snappyHexMesh won't work - zeros everywhere! sc298 OpenFOAM Native Meshers: snappyHexMesh and Others 2 March 27, 2011 21:11
external flow with snappyHexMesh chelvistero OpenFOAM 11 January 15, 2010 20:43
ICEM hexa mesh built with v10 deformed in v11 (degenerated edges) cfxicem ANSYS Meshing & Geometry 1 October 14, 2009 15:06
ICEM CFD 5.1 Hex-Tet mesh merging failure bogesz CFX 1 January 29, 2005 07:46


All times are GMT -4. The time now is 02:01.