CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Nozzle Flow Simulation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 24, 2007, 11:10
Default Nozzle Flow Simulation
  #1
Winnie
Guest
 
Posts: n/a
Dear,

Actually, I'm pretty new with the simulation by using CFX and would like some kind of suggestion which can help me to start this correctly.

My problem is the nozzle jet which will spray Nitrogen on to target at the height of a few hundred micron. Therefore, I would like to simulation the flow effect which probably mass flow or pressure over my target to evaluate my nozzle design.

I'd start from my nozzle with 2 domains and both domain has different fluid property. Anyway, please kindly comment the I can start it up correctly and Thank you so much indeed.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Help with slug flow simulation. Kes FLUENT 3 November 9, 2019 22:39
Simulation of a complex wing in solidworks flow simulation niels1900 FloEFD, FloWorks & FloTHERM 6 April 20, 2011 11:44
Wing lift in Solidwork Flow Simulation brianmcv Main CFD Forum 6 April 11, 2011 09:16
Simulation of steam (CO2 and Water vapor mixture) flow through nozzle using Fluent. Jimmy FLUENT 0 March 2, 2011 13:30
fluid flow fundas ram Main CFD Forum 5 June 17, 2000 22:31


All times are GMT -4. The time now is 03:56.