CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

wall roughness with SST turbulence model in CFX10

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 7, 2007, 12:42
Default wall roughness with SST turbulence model in CFX10
  #1
Vincent
Guest
 
Posts: n/a
I'm trying to set a wall roughness using the SST turbulence model in CFX-10. The documentation says it is a beta feature and there are posts (dating from 2005 and CFX 5.6) saying you can set a roughness modifying the .ccl file. (http://www.cfd-online.com/Forum/cfx_...cgi/read/10419)

I've tried to set the extra parameters but I've got the error: 'TURBULENT WALL FUNCTIONS' is not allowed in FLOW/DOMAINomain 1 /BOUNDARY:wall/BOUNDARY CONDITIONS. And setting just the roughness (whithout changing any other parameters) give the exact same result than the computation without any roughness.

Has anyone set a wall rougness with SST in CFX 10? Thank you for your help.
  Reply With Quote

Old   September 7, 2007, 13:02
Default Re: wall roughness with SST turbulence model in CF
  #2
opaque
Guest
 
Posts: n/a
Dear Vincent,

I imagine you want to access the turbulent wall function for the momentum boundary condition closure. You should add the TURBULENT WALL FUNCTIONS within WALL INFLUENCE ON THE FLOW. For example,

BOUNDARY CONDITIONS:

WALL INFLUENCE ON THE FLOW

Option = No Slip

TURBULENT WALL FUNCTIONS:

Option = Rough Wall Omega Automatic

END

END

END

Hope this help, Opaque

  Reply With Quote

Old   September 7, 2007, 14:48
Default Re: wall roughness with SST turbulence model in CF
  #3
Vincent
Guest
 
Posts: n/a
Thanks a lot. I accessed the turbulent wall function with this syntax. But Cfx pre says that the Option you mentioned (Rough Wall Omega Automatic) is an 'Invalid Option parameter'. Was it just an example or is there really some automatic option for the turbulent wall functions when using a wall roughness and the SST turbulence model?
  Reply With Quote

Old   September 7, 2007, 15:24
Default Re: wall roughness with SST turbulence model in CF
  #4
opaque
Guest
 
Posts: n/a
Dear Vincent,

There are two options named Rough Wall Omega Automatic and Rough Wall Omega Scalable. Neither of them is allowed in the GUI for 10.0 or 11.0.. Maybe 12.0 has it.

There is an additional parameter that can be added to the Rough Wall Omega Scalable named Rough Wall Minimum Yplus to determine the specific yplus for that boundary.

Regards,

Opaque

  Reply With Quote

Old   September 10, 2007, 15:52
Default Re: wall roughness with SST turbulence model in CF
  #5
Vincent
Guest
 
Posts: n/a
Thank you opaque for your help. But I still can't set properly a roughness with cfx-10 and the SST turbulence model.

When I just include the roughness in the .ccl it doesn't change anything to my result without any roughness. And when I include the extra parameters mentionned under, my result is different but doesn't depend on the value of my roughness... Has anyone succeeded to implement a roughness with the SST model?

Extra parameter I used :

FLOW:

EXPERT PARAMETERS:

effective viscosity type = 2

END

END

and :

WALL INFLUENCE ON FLOW:

Option = No Slip

TURBULENT WALL FUNCTIONS:

Option = Scalable

Minimum Yplus = 2.5

END

END
  Reply With Quote

Old   September 10, 2007, 16:32
Default Re: wall roughness with SST turbulence model in CF
  #6
opaque
Guest
 
Posts: n/a
Dear Vincent,

Unfortunately, I do not understand why is not picking up your roughness data. Have you updated to 11.0? I do not recall if there were any problems with the 10.0 rough wall model for SST. Have you contacted help desk already about this issue?

On a different topic, who adviced you to change the effective viscosity type from its default value to 2? Help desk?

Regards,

Opaque.

  Reply With Quote

Old   September 10, 2007, 16:40
Default Re: wall roughness with SST turbulence model in CF
  #7
Vincent
Guest
 
Posts: n/a
I'm still using cfx-10.0. I saw the advice on the effective viscosity in a previous post : http://www.cfd-online.com/Forum/cfx_...cgi/read/12758

I've not contacted help desk yet. I tell you what they advice me if I do.

Thanks again,

Vincent
  Reply With Quote

Old   September 10, 2007, 17:49
Default Re: wall roughness with SST turbulence model in CF
  #8
opaque
Guest
 
Posts: n/a
Dear Vincent,

Unfortunately, I do not understand why is not picking up your roughness data. Have you updated to 11.0? I do not recall if there were any problems with the 10.0 rough wall model for SST. Have you contacted help desk already about this issue?

On a different topic, who adviced you to change the effective viscosity type from its default value to 2? Help desk?

Regards,

Opaque.

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Possible to account for surface roughness with SST model? LSC CFX 39 June 14, 2014 07:11
Transitional Flow Shear Stress Transport (SST) k-omega Turbulence Model josechen FLUENT 0 July 20, 2011 17:06
K-Omega SST Turbulence Model nvtrieu STAR-CCM+ 3 July 21, 2010 06:05
SST transitional turbulence model Ben Akih CFX 3 June 8, 2006 16:52
Wall functions Abhijit Tilak Main CFD Forum 6 February 5, 1999 02:16


All times are GMT -4. The time now is 14:45.