CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

Can Mesh in initial guess be different that actual

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 18, 2007, 15:33
Default Can Mesh in initial guess be different that actual
  #1
Kushagra Mittal
Guest
 
Posts: n/a
Hi,

From document 'Initial Condition Modelling: Initialisation Parameters' (ANSYS CFX-Solver, Release 10.0 : Modelling page 95 ), it seems that mesh should be exactly same if initial condition is taken from some result file.

On the other hand, in Tutotrial 2 (Static Mixer with Refined mesh), we select the option 'Interpolate Initial Values onto Def File Mesh' while running the simulation in solver manager.' Meshes in initial solution result file and new simulation file are not same.

I am confused with above two stories.

Kindly suggest where I am misunderstanding...

Many thank in advance,

Regards, Kush.

  Reply With Quote

Old   September 18, 2007, 15:54
Default Re: Can Mesh in initial guess be different that ac
  #2
CycLone
Guest
 
Posts: n/a
You can do either.

If you simply pick a results file to initialize from, the solver will use the physics definition from your .def file and the mesh and results from your .res file.

If you do the same and turn on the "interpolate initial guess" option, the results in the .res file will be interpolated onto the mesh of the .def file.

If your mesh is different than the mesh in the results file, you must turn on the interpolate option or else you'll end up using the old mesh, rather than your new one.

The old interpolation routine was very slow, so you generally wanted to avoid interpolating where possible. It was re-written in version 11 and is extremely fast now, so I would recommend using the interpolation option virtual every time.

-CycLone
  Reply With Quote

Old   September 18, 2007, 16:12
Default Re: Can Mesh in initial guess be different that ac
  #3
Kushagra Mittal
Guest
 
Posts: n/a
Thanks a lot !!!!!!!!!!!!!!!!! It makes picture very clear. I am having CFX-11 as well. Thanks once again.

Cheers, Kush.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Moving mesh Niklas Wikstrom (Wikstrom) OpenFOAM Running, Solving & CFD 122 June 15, 2014 07:20
problem with Min/max rho tH3f0rC3 OpenFOAM 7 February 23, 2013 06:37
ForcesCoeffs ronaldo OpenFOAM 4 September 14, 2009 08:11
Problems with simulating TurbFOAM barath.ezhilan OpenFOAM 13 July 16, 2009 06:55
Modeling in micron scale using icoFoam m9819348 OpenFOAM Running, Solving & CFD 7 October 27, 2007 01:36


All times are GMT -4. The time now is 08:28.