CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

notice in CFX solver

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 24, 2007, 04:19
Default notice in CFX solver
  #1
sravani
Guest
 
Posts: n/a
Hi Everybody,

when i am runing a program in solver a notice is being displayed after every iteration as

"A Wall has been placed at portion(s) of an OUTLET boundary condition(at 89.6% of the faces,at 89.6% of the area) to prevent fluids from flowing into the domain. The boundary condition name is : OUTLET. The fluid name is : water. If this situation persists, consider switching to an opening type boundary condition instead."

what does this mean?how to get rid of this?what does this 'opening type boundary condition' mean?

OUTLET BOUNDARY DETAILS are: I have considered Mass Flow Rate with a value of 1 kg/sec.

thanq.

  Reply With Quote

Old   September 24, 2007, 14:44
Default Re: notice in CFX solver
  #2
Hamidur
Guest
 
Posts: n/a
Hi It means that there is a reverse flow at the exit boundary. You could extend your outlet further downstream to get rid of this warning. Thanks
  Reply With Quote

Old   September 26, 2007, 04:46
Default Re: notice in CFX solver
  #3
sravani
Guest
 
Posts: n/a
thank you.. but how to extend the outlet?my input for outlet boundary condition is just mass flow rate.sorry if this is a silly question,but i am not getting any idea.
  Reply With Quote

Old   September 27, 2007, 14:01
Default Re: notice in CFX solver
  #4
Hamidur Rahman
Guest
 
Posts: n/a
well, you can do something like, use either total pressure as inlet and mass flow in outlet or mass flow at inlet and static pressure at outlet. Hope if you do so you should not have any problem with the reverse flow. Thanks
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
thobois class engineTopoChangerMesh error Peter_600 OpenFOAM 4 August 2, 2014 10:52
CFX solver error kh_thakor CFX 3 January 11, 2011 17:39
CFX 11 x64 solver? problem Attesz CFX 6 June 7, 2009 09:37
FSI error"the connection between cfx and external solver has died unexpectedly" mortazavi CFX 0 June 1, 2009 05:58
problem in CFX solver about isolated volumes Yuan CFX 2 August 16, 2004 23:54


All times are GMT -4. The time now is 00:38.