CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

EXTRUDE option in ICEM CFD Geometry

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 23, 2007, 14:03
Default EXTRUDE option in ICEM CFD Geometry
  #1
Mohammad Faridul Alam
Guest
 
Posts: n/a
Is there any extrude option in ICEM CFD geometry? Or is there any other way to transform a 2D geometry to 3D??
  Reply With Quote

Old   October 23, 2007, 22:41
Default Re: EXTRUDE option in ICEM CFD Geometry
  #2
myron
Guest
 
Posts: n/a
You can copy surfaces - then create 'side' surfaces based on bounding curves. As ICEM CFD is not 'solids' based - but rather surface-based, there is no direct geometry extrustion. However - you can extrude mesh.
  Reply With Quote

Old   October 23, 2007, 22:43
Default Re: EXTRUDE option in ICEM CFD Geometry
  #3
Glenn Horrocks
Guest
 
Posts: n/a
Hi,

Yes, some more details: http://www.cfd-online.com/Forum/cfx.cgi?read=23161

Glenn Horrocks
  Reply With Quote

Old   October 24, 2007, 04:13
Default Re: EXTRUDE option in ICEM CFD Geometry
  #4
Abhishek Sarkar
Guest
 
Posts: n/a
Yes, there is an extrude option in Edit mesh tab. Once you have created your pre-mesh, then the edit mesh tab will be highlighted and then you can click on the extrude mesh tab and select which option you want e.g. axisymmetric, etc.
  Reply With Quote

Old   October 25, 2007, 18:47
Default Re: EXTRUDE option in ICEM CFD Geometry
  #5
Mohammad Faridul Alam
Guest
 
Posts: n/a
Thanks all for ur help.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
mass flow in is not equal to mass flow out saii CFX 12 March 19, 2018 06:21
Water subcooled boiling Attesz CFX 7 January 5, 2013 04:32
Constant velocity of the material Sas CFX 15 July 13, 2010 09:56
flow over an airfoil 3d ( Geometry on icem cfd ) dfmona Main CFD Forum 0 April 14, 2010 00:32
No results for solid domain Gary Holland CFX 10 March 13, 2009 04:30


All times are GMT -4. The time now is 06:28.