|
[Sponsors] |
October 15, 2007, 09:00 |
CFX-Post Help
|
#1 |
Guest
Posts: n/a
|
Hi All,
I'm having trouble plotting a XY plot in CFX-11. My model is an artery which is simply a cylinder with a dint in the middle. I want to plot the radial distance on the X-axis and Axial Velocity on the Y-axis. I need to plot this at an exact location; i.e. 22.5mm along the axial direction (z axis). I'm having trouble in creating this location, as I am unable to create a "point" because I'm not in "time" plot. I tried creating 2 planes intersecting each other at 22.5mm but that didn't work...can anyone help? Thanks, CC. |
|
October 15, 2007, 09:22 |
Re: CFX-Post Help
|
#2 |
Guest
Posts: n/a
|
Hello CC,
I didn't understand what you mean by "time" plot. Usually for the case you have mentioned, creat 1st point at (0,0,22.5) and the 2nd point on the surface of the cylinder, i.e radially outward by giving the proper coordinates. Create a line between these points and then use chart option. Take 'radius' in x axis and desired parameter in y axis. Regards Anantha |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How to get reynolds stress values in POST CFX | syler3321 | CFX | 6 | January 1, 2017 07:54 |
CFX post legend modification | mactech001 | CFX | 3 | December 25, 2011 22:12 |
CFX post - graph | kmgraju | CFX | 0 | July 22, 2010 11:59 |
Chart Generation in CFX Post | Vadim Baines-Jones | CFX | 2 | August 28, 2007 09:14 |
Tecplot for CFX post processing | pantangi goud | CFX | 2 | August 24, 2005 16:42 |