CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

CFX-Pre

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 31, 2007, 09:24
Default CFX-Pre
  #1
Aloha
Guest
 
Posts: n/a
Hi,everyone, I'm a beginning learner of CFX. I got a problem When I was creating a new simulation in CFX-Pre. After I typed a file name in a working directory and clicked the "save" button, I was prompted an ERROR message as follows, "the supplied file name, temp.00.gtm, can't be opened as a CFX data file. This could be because it has the wrong format or because you don't have write perssions in the requested directory" I'm not sure if it because I dont have a correct license file, since during the Ansys Licensing process when I was installing CFX 10.0, I chose the "ICEM.dat" license file as the required license file. But finally the prompted message showed that the licensing process was successful, and the CFX launcher could be run normally, as well as the CFX-Pre. I would be very thankful to anyone who can help me solve the problem. You can also contact with me through Email if you are interested in it, and my address is wateraction@126.com.

  Reply With Quote

Old   October 31, 2007, 21:11
Default Re: CFX-Pre
  #2
Rikio
Guest
 
Posts: n/a
Aloha: Are you sure that you have created the file in the working directory? If it is not, this error may appear. I have got a same problem with you.

Rikio
  Reply With Quote

Old   November 1, 2007, 12:09
Default Re: CFX-Pre
  #3
Aloha
Guest
 
Posts: n/a
Rikioļ¼šThank you for your response.Luckily I got the problem solved today. Actually I did't do anything special, I just turned on my computer, and everything went on very well. I think maybe it because I didn't reboot my computer after installing CFX, while the reboot step is necessary for some configuration changes. I shut down my puter last night and turned it on this morning, I guess what I did happened to have the same function as rebooting, so the problem solved. Thanks again, Rikio.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
only 1 of many named selections not showing up in cfx pre mihirbhagat CFX 0 July 5, 2011 05:22
CFX Pre - TGrid Vivek Vasudevan CFX 2 March 20, 2007 07:31
No.of Elements in ICEM and CFX Pre Manu CFX 1 August 25, 2006 07:20
CFX 5.7.1 PRE and solver won't start daniel CFX 1 January 20, 2006 10:09
CFX 5.7 pre Neser CFX 0 January 27, 2005 11:22


All times are GMT -4. The time now is 03:22.