CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

Domain interface

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 19, 2007, 07:34
Default Domain interface
  #1
Debabrata Mahapatra
Guest
 
Posts: n/a
Hello

I made a hex mesh of my model using ICEMCFD and made selective refinement of the mesh using the option 'blocking > premesh param > refinement . While importing this mesh file into CFX-pre, in the default domain there are some coarse and fine mesh parts apart from my normal 'inlet' , 'outlet' and wall parts. I created domain interfaces between coarse and fine parts but still the solver is getting crashed. Plz help.

Thanks n regds Debu
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
CFX does not continue Shafiul CFX 10 February 17, 2011 08:57
Interface w. Pitch Change: Thcfd CFX 0 December 22, 2010 04:50
increasing mesh quality is leading to poor convergence tippo CFX 2 May 5, 2009 10:55
No results for solid domain Gary Holland CFX 10 March 13, 2009 04:30
Fluid - Solid Domain Interface Daniel CFX 6 February 15, 2009 19:09


All times are GMT -4. The time now is 07:23.