CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Solver stops abruptly without errors

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 18, 2007, 05:10
Default Solver stops abruptly without errors
  #1
prabhu
Guest
 
Posts: n/a
CFX 11.0 on Linux 8 node cluster. The solver stops abruptly after some thousand iterations without completion. No error message is shown. Solver status says it is running but the solver will not be running. If anybody has faced this problem , please help
  Reply With Quote

Old   December 20, 2007, 02:35
Default Re: Solver stops abruptly without errors
  #2
Chirag Jayswal
Guest
 
Posts: n/a
We have been running CFX on Linux cluster. But, never faced any problem like this. May be because we did not run any problem on that cluster beyond 1000 iterations.

Speaking to CFX support team may help over here.

Chirag
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Building OpenFOAM1.7.0 from source ata OpenFOAM Installation 46 March 6, 2022 14:21
Quarter Burner mesh with periosic condition SamCanuck FLUENT 2 August 31, 2011 12:34
Getting too many iterations by velocity solving (aborting). Changing U - Solver? suitup OpenFOAM Running, Solving & CFD 0 January 20, 2010 08:45
Setting a B.C using UserFortran in 4.3 tokai CFX 10 July 17, 2001 17:25
Error during Solver cfd guy CFX 4 May 8, 2001 07:04


All times are GMT -4. The time now is 00:46.