|
[Sponsors] |
January 10, 2008, 01:54 |
ERROR #001100279
|
#1 |
Guest
Posts: n/a
|
Hi all, When I tried to run my simulation in CFX-Solver, I got the following error message.
ERROR #001100279 has occurred in subroutine ErrAction. Message: ****** FATAL ERROR ****** The orthographic view transformation failed on domain interface "Domain Interface 7". Obviously, I have more than one mesh imported in CFX pre and I used a parellel Run Mode for solving the problem. Can anybody give me an idea, as to how I can get away with this problem? Thanks in advance. |
|
January 10, 2008, 17:43 |
Re: ERROR #001100279
|
#2 |
Guest
Posts: n/a
|
Hi,
I don't know what the error means in detail but it seems to be having troubles getting a domain interface to work. I bet you have either a complicated interface surface or a poor quality mesh. I would remodel the geometry and remesh to simplify the surface and improve mesh quality. Glenn Horrocks |
|
January 10, 2008, 22:48 |
Re: ERROR #001100279
|
#3 |
Guest
Posts: n/a
|
Thanks Glenn! As you said, its because of the difference in the mesh quality on either sides of the interface. Thanks a lot.
|
|
|
|