CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   how to make turbine blade in Ansys Blademodeler (http://www.cfd-online.com/Forums/cfx/25067-how-make-turbine-blade-ansys-blademodeler.html)

Usman January 18, 2008 11:36

how to make turbine blade in Ansys Blademodeler
 
Hi, I have three radial sections of a turbine blade (at hub, mean and tip). How can i make full 3D blade out if it in Blademodeler. Kindly also tell if i mesh the turbine geometry in TurboGrid, can i export it to Fluent for CFD analysis. Many Thanks,

Usman January 18, 2008 13:39

Re: how to make turbine blade in Ansys Blademodele
 
Hi Usman

Regarding your second question you should be able to do that! I have never done it though.

Regards Usman

Pankaj January 22, 2008 05:17

Re: how to make turbine blade in Ansys Blademodele
 
Hi Usman!

There are some examples of bladegen files stored in your root directory(else search for .bgd files)which can give you some idea about how to make a turbine blade.

spoorthi January 29, 2008 05:53

Re: how to make turbine blade in Ansys Blademodele
 
how to make turbine blade in Ansys Blademodeler


All times are GMT -4. The time now is 10:40.