CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

How to monitor variable values of point at t=0 sec

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 12, 2008, 23:48
Default How to monitor variable values of point at t=0 sec
  #1
yunhee
Guest
 
Posts: n/a
I wonder how I can monitor values of user points at t=0 sec in cfx-solver. Graph shows the values from t=1 sec instead of t=0 sec. If somebody know it, please let me know it. Thank you.

  Reply With Quote

Old   February 13, 2008, 06:15
Default Re: How to monitor variable values of point at t=0
  #2
Subha
Guest
 
Posts: n/a
Hai Yunhee,

The values at t=0 are the initial values you set or those calculated by the solver(if automatic intial values are chosen).

Regards,

Subha.
  Reply With Quote

Old   February 13, 2008, 11:02
Default Re: How to monitor variable values of point at t=0
  #3
Carlos
Guest
 
Posts: n/a
Heloo,

You can save a backup at t=0 setting the expert parameter "backup file at zero=t"

  Reply With Quote

Old   February 13, 2008, 13:45
Default Re: How to monitor variable values of point at t=0
  #4
yunhee
Guest
 
Posts: n/a
Thank you, Subha and Carlos. According to Carlos advice, I could save a backtup at t=0. By the way, I want to plot the values (e.g., force) of user defined points at t=0 in monitoring window of cfx-solver. Then I can save the values at t=0 with csv file using the export plot data function. Although I set the expert parameter (backupt fiel at zero=t), the plot starts from t=1 still. So, I cannot do what I want explained above. If you don't mind, could you please give any idea to solve this problem? Thanks a lot.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Monitor Point Values Tristan CFX 2 October 28, 2008 15:01
Monitor point values in a steady state simulation Kushagra CFX 2 July 13, 2008 20:03
output point values in CFX4 Dougal McQueen CFX 1 February 14, 2004 00:55
Output from the Monitor point command swapnil CFX 0 November 20, 2002 23:08
CFX4.3 -build analysis form Chie Min CFX 5 July 12, 2001 23:19


All times are GMT -4. The time now is 01:34.