|
[Sponsors] |
February 21, 2008, 08:06 |
high temperature plasma burning
|
#1 |
Guest
Posts: n/a
|
Did anyone use CFX for something like following problem? Many phase plasma burning (with chemical reactions) of dispersed solid coal particles or liquid fuel droplets in air (or other) plasma flow. Temperature of the process can reach 4000-6000K. I think CFX can, but I'm not sure about so high temperature burning. Does anybody have any experience? Thanks for your response!
|
|
February 21, 2008, 17:51 |
Re: high temperature plasma burning
|
#2 |
Guest
Posts: n/a
|
Hi,
CFX does not have the physics to describe plasma flows. CFX has models to handle normal coal or fuel burning, but I don't think they are valid at the temperatures you are quoting (somebody correct me if I am wrong). Also I can't see how coal or fuel could get temperatures as high as you suggest. You must be doing something strange to it to get temperatures that high. Glenn Horrocks |
|
February 22, 2008, 01:43 |
Re: high temperature plasma burning
|
#3 |
Guest
Posts: n/a
|
Thank you Glenn for your answer. The problem isn't my. I don't know about details. But in general, it has an ecological direction. It is annihilation of polluted ground by burning-out in plasma (e.g. oil-cut soil).
|
|
February 24, 2008, 17:13 |
Re: high temperature plasma burning
|
#4 |
Guest
Posts: n/a
|
Hi,
OK, if the temperatures are high enough to make plasma effects significant then forget about using CFX. Glenn Horrocks |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
natural convection with high temperature gradient? | phsieh2005 | Main CFD Forum | 5 | September 23, 2015 08:25 |
Calculation of the Governing Equations | Mihail | CFX | 7 | September 7, 2014 06:27 |
Extremely high Temperature needed to simulate pressurization with rhoCentralFoam | shangzung | OpenFOAM Running, Solving & CFD | 0 | August 6, 2010 06:35 |
High temperature methane+air | Peter | FLUENT | 5 | January 26, 2009 18:04 |
Multicomponent fluid | Andrea | CFX | 2 | October 11, 2004 05:12 |