CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Change Catalogue Size Multiplier Parameter

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 29, 2008, 13:49
Default Change Catalogue Size Multiplier Parameter
  #1
ahlo
Guest
 
Posts: n/a
Hi,

I used to change this number from CFX solver manager, but it hinders me to make batch processing. Is there any way to make it within CFX-pre setting or by scripting?

Thanks

Ahlo
  Reply With Quote

Old   March 3, 2008, 05:21
Default Re: Change Catalogue Size Multiplier Parameter
  #2
Pankaj
Guest
 
Posts: n/a
Dear Ahlo!

You need to edit it through command editor. Right click on simulation in cfxpre,edit in command editor,Copy and paste 'Catalogue Size Multiplier = 2'(do not use inverted comma)in solver control section.

This must work.

Regards, Pankaj.
  Reply With Quote

Old   March 5, 2008, 14:39
Default Re: Change Catalogue Size Multiplier Parameter
  #3
ahlo
Guest
 
Posts: n/a
Hi Pankaj,

Following your indication, I inserted

Catalogue Size Multiplier =2

behind SOLVER CONTROL:

and click "Process" Button and then "Close" Button

Then I save again this .cfx file. When I open the file again, it seems that this line is not saved within the .cfx file. Is it possible let .cfx file remember this new line?

Thanks

Ahlo
  Reply With Quote

Old   March 6, 2008, 01:30
Default Re: Change Catalogue Size Multiplier Parameter
  #4
Pankaj
Guest
 
Posts: n/a
Dear Ahlo,

First tell me whether your problem of catalogue size has been solved?

If solved,then just add the line in solver control,export one ccl file (which can be read through notepad)from CFX pre.Then every time import mesh,ccl file and go ahead.

I think this must work.

Regards, Pankaj.
  Reply With Quote

Old   March 6, 2008, 12:06
Default Re: Change Catalogue Size Multiplier Parameter
  #5
ahlo
Guest
 
Posts: n/a
Hi Pankaj

This CCL approach works well. Thank you

Ahlo

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Help with fixing imported IGES model siw ANSYS Meshing & Geometry 24 August 24, 2010 12:22
critical error during installation of openfoam Fabio88 OpenFOAM Installation 21 June 2, 2010 04:01
Phase locked average in run time panara OpenFOAM 2 February 20, 2008 15:37
INSUFFICIENT CATALOGUE SIZE xfshi CFX 3 June 11, 2003 15:16
File Catalogue Size Jesper CFX 2 December 3, 2002 06:03


All times are GMT -4. The time now is 11:16.