Question on blade meshing -- CFD Online Discussion Forums

March 7, 2008, 17:13	Question on blade meshing	#1
Jeffrey Guest Posts: n/a	Hi guys, I'm trying to do a simulation on a micro jet engine without any combustion model at the moment, just airflow. I have a question regarding blade meshing. I'm aware that one can easily generate a blade mesh using BladeGen and TurboGrid for one single blade. My question is, Is there any way that I can generate a blade mesh for more than 1 blade? I need 3 blades in one mesh. Currently, I'm just importing the 1-blade mesh and transform(rotate) it to create 2 other in CFX-pre for my simulation. Any help would be very much appreciated. Regards, Jeff

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Meshing very thin blade tip	Jenny	CFX	7	June 27, 2014 08:26
Meshing problem trailing edge of blade	ben-18	ANSYS Meshing & Geometry	1	July 13, 2011 10:39
Rotating blade in circular/square vessel (Salome+OpenFoam)	voingiappone	OpenFOAM	0	May 19, 2011 11:38
Meshing locks workbench window.	andy2o	CFX	0	February 1, 2008 05:01
gambit meshing scheme question	Juliana P	FLUENT	1	October 28, 2005 09:15

All times are GMT -4. The time now is 18:13.