CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

UserFortran

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 13, 2008, 08:58
Default UserFortran
  #1
Adi
Guest
 
Posts: n/a
If I want to monitor mass flow average of temperature at outlet in a domain, then i can specify the same in CCL file which will reflect in solver as massflowAve(temperature)@outlet. This is simple as temp is a system variable.

Note:As far as I understand, USER_GET_GVAR subroutine in the junction box code does this concatenation for us.

Now is it possible to monitor a user variable like coeff of lift which is a fuction of normal and tangential forces and print its value after every iteration using a junction box routine or User CEL function??

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
UserFORTRAN and Profile Boundary Conditions furieri CFX 1 July 29, 2008 11:11
gradient calculation UserFortran code Karlis CFX 4 June 20, 2005 11:58
UserFortran source problem Karlis CFX 0 June 19, 2005 11:03
Setting a B.C using UserFortran in 4.3 tokai CFX 10 July 17, 2001 16:25


All times are GMT -4. The time now is 19:54.