CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

overflow error

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 20, 2008, 07:34
Default overflow error
  #1
Julian Maldonado
Guest
 
Posts: n/a
Dear all,

I made some simulation in CFX 11 of sails boat. after 100 iter. an error comes up " float point overflow". In CFX's manual this error is about boundary conditions.

I don't Know if the error is becouse the sails geometry of very low thick.

Some idea that the way to safe avoid this error??

Thanks!! J.
  Reply With Quote

Old   March 24, 2008, 17:36
Default Re: overflow error
  #2
Glenn Horrocks
Guest
 
Posts: n/a
Hi,

You need to describe what you are doing better for us to help.

Float point overflow can come from a number of sources, either incorrect setup or the simulation diverging. Read the tips for obtaining convergence in the documentation.

Glenn Horrocks
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Compile calcMassFlowC aurore OpenFOAM Programming & Development 12 March 18, 2014 05:22
nonNewtonian viscosity model mhassani OpenFOAM Programming & Development 5 January 7, 2013 10:27
Accessing phi from a fvPatchField at same patch johndeas OpenFOAM 1 September 13, 2010 20:23
attach/detach (valve opening/closing) phsieh2005 OpenFOAM Running, Solving & CFD 2 March 21, 2009 06:18
OpenFOAM on MinGW crosscompiler hosted on Linux allenzhao OpenFOAM Installation 127 January 30, 2009 20:08


All times are GMT -4. The time now is 11:54.